Ecotile does not generate static independently. Static electrical charges buildup as a result of the motion of people, carts and furniture, equipment or machinery, the type of operative footwear and atmospheric conditions.
Ecotile and finishes like epoxy resin create a more hard-wearing floor covering but do not
dissipate electrical charges as quickly as a porous floor.
Concrete or wooden floors are especially conductive due to their porous and hygroscopic
properties (ability to absorb and release water vapour from the surrounding air). So, they
can dissipate any electrostatic charges on the surface quickly. Covering this kind of surface
with a product that does not absorb moisture and is not as conductive (installing Ecotile, for
example) may lessen its ability to dissipate static and could cause static shocks to occur
more frequently.
- Wash the floor with cold water to remove any dust, debris or residue from the floor
surface - Avoid wearing clothing made from wool and synthetic fabrics, which generate a lot
of static from friction - Wear antistatic footwear or use heel straps to reduce buildup between the operative
and the floor - Frequently touch a metal object using another metal object to release static charges
- Wear ESD wrist straps or create areas with ESD matting to help dissipate electrostatic discharges
- Measure and increase humidity levels in your environment. Aim for between 25 and 50 percent humidity
- Identify if the problem occurs with specific staff members or if shocks happen more
frequently in some areas. Ensure metal surfaces are earthed (touch a grounded appliance, wire a ground circuit or apply a neutralising charge) - Regularly clean and maintain your Ecotile floor, referring to the Ecotile cleaning guidelines.